Product

The KAUPA BS-9371 Cold Adhesive Glue Paintless Dent Repair kit is reusable in use and practically does not run out. The special composition provides quick, strong adhesion, sufficient to perform a wide range of PDR tasks. The composition is easy to use, even suitable for PDR beginners.
Strong adhesion provides extreme traction combined with easy removal. Upon application the surface must be free of grease. Water and at least 20 degrees Celsius. The kit does not damage the body paintwork, is completely safe to use! The fastening system is suitable for our special design sliding hammer with aluminum alloy adaptor.

Instant strong adhesion! Low cost and quick payback!
Set contains :
- 1.3kg Sliding hammer with Aluminum alloy Adaptor
- Four aluminum alloy adaptor –
Rectangular Adaptor : 36 mm x 80 mm
Rectangular Adaptor : 22 mm x 75 mm,
Round Adaptor : 52mm Diameter
Round Adaptor : 38mm Diameter
- 50g special cold adhesive glue

OPERATION :

1. Select the proper aluminum alloy adaptor with dent repair area.
2. Open the plastic box with black cold glue, separate small amount apply evenly on the surface of aluminum alloy adaptor, winding the black glue over the edge of adaptor
3. Install the aluminum alloy adaptor on the red handle of the sliding hammer
4. Apply the sliding hammer with adaptor to the repair area, make an effort to apply the black glue evenly stick on the repair area.
5. Proceed to pull the dent out by striking the slide hammer weight against the stop end.
6. Ease away from the painted surface and clean up.
7. Storage with plastic box and anti-adhesive paper for many more repairs.